[c-nsp] ME3600 config help, Q in Q

[Brian Christopher Raaen]

James, is this a Q-in-Q with those two vlans encapsulated inside a vlan
1048 tag.  Also check the MTU, te be able to carry Q-in-Q you will need to
set it to 1512 or greater for the extra tag overhead.


On Fri, Aug 8, 2014 at 12:17 PM, james edwards <
lists.james.edwards at gmail.com> wrote:

> I am trying to configure an interface on a ME3600 to accept Q in Q
> from a provider. The p-vlan the provider is using is 1048 and they are
> carrying customer vlans (c-vlan) 1058-1098, one from each site. I'm
> new to the 3600 and have not done Q in Q on it yet. I've worked up
> this much of the config but it does not seem right. Can anyone give me
> some pointers or links to help me along ? I've only got one customer
> site configed, there will be 14.
>
>
> !
> vlan 1048
>  name WINDSTREAM
> !
> vlan 1058
>  name WINDSTREAM-HOBBS
> !
> interface GigabitEthernet0/6
>  description Windstream VLS IP.LVXX.xxxxxx..WCI.001
>  port-type nni
>  switchport trunk allowed vlan none
>  switchport mode trunk
>  service instance 10 ethernet
>   encapsulation dot1q 1048
>   rewrite ingress tag pop 1 symmetric
>   bridge-domain 10
>  !
> !
> interface Vlan1048
>  description Windstream VLS
>  no ip address
> !
> interface Vlan1058
>  description WINDSTREAM-HOBBS
>  ip address xxx.xx.xx.1 255.255.255.0
>
>
>
> Thanks,
>
> James
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
Brian Christopher Raaen
Network Architect
Zcorum