[c-nsp] Sup720 Redundancy Problems

[Tammy Firefly]

In s72033-advipservicesk9_wan-mz.122-33.SXJ5.bin that command doesnt exist.


On 8/17/14, 3:35:31, Ben Hammadi, Kayssar (NSN - TN/Tunis) wrote:
> Hi,
> 
>  Try : redundancy config-sync ignore mismatch , then reload the standby
> 
> Cdt
> Kayssar
> 
>> On Aug 17, 2014, at 4:04, "ext Tammy Firefly" <tammy-lists at wiztech.biz> wrote:
>>
>>
>>> On 8/16/14, 20:53:18, Frank Bulk wrote:
>>> Looks like you got them all on =)
>>>
>>> When you successfully boot the new SUP in a separate chassis is it running
>>> the exact same software as the production SUP?
>>
>> Yup exact same image.
>>
>>>
>>> One other article I read suggested changing the mode to RPR
>>> (http://www.cisco.com/c/en/us/td/docs/ios/12_2sr/release/notes/122SRcavs2.pd
>>> f) which means:
>>> conf t
>>> redundancy
>>> mode rpr
>>> end
>> Ill give this a try.
>>
>>
>> One thing I did notice is the new sup has a 128MB CF card in a flash
>> adapter on the sup, the other sup has a 64mb flash module.
>> Would that cause this?
>>
>>>
>>> Frank
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> 
> ----------
> 
> This email has been scanned for spam and viruses by Proofpoint Essentials cloud email security - visit the following URL to report this email as spam:
> https://us1.proofpointessentials.com/index01.php?mod_id&mod_option=logitem&midf689306&rid12411&report=1
>