[c-nsp] Sup720 Redundancy Problems
Tammy Firefly
tammy-lists at wiztech.biz
Mon Aug 18 03:05:35 EDT 2014
Hi Gert,
So if we don't specify which file system it's on where does it presume the config file lives?
Thanks
Tammy
Sent from my iPhone
> On Aug 18, 2014, at 0:58, Gert Doering <gert at greenie.muc.de> wrote:
>
> Hi,
>
>> On Sun, Aug 17, 2014 at 04:46:46PM -0600, Tammy Firefly wrote:
>> I finally tracked it down, this is what caused it:
>> boot-start-marker
>> boot system flash disk0:s72033-advipservicesk9_wan-mz.122-33.SXJ5.bin
>> boot config bootflash:startup-config
>> boot-end-marker
>>
>> How do I specify which image to load without using that in the startup
>> configuration?
>
> From what I read in the thread, it's not "boot system" but "boot config"
> that is causing you pains.
>
> "boot system" should work fine, provided the slave has a disk0: with that
> file on it.
>
> gert
> --
> USENET is *not* the non-clickable part of WWW!
> //www.muc.de/~gert/
> Gert Doering - Munich, Germany gert at greenie.muc.de
> fax: +49-89-35655025 gert at net.informatik.tu-muenchen.de
More information about the cisco-nsp
mailing list