[c-nsp] Gbic (SFP) Troubleshoot

[Wouter Prins]

If it supports optical monitoring you can use 'show interface x/y transceiver'

> On 28 Aug 2014, at 19:45, Harry Hambi - Atos <harry.hambi at bbc.co.uk> wrote:
> 
> Hi All,
> Are there troubleshooting commands that can be run from the switch CLI to check the health of the optics?. I suspect one of the Gbics In my link has failed.
> 
> 
> Rgds
> Harry
> 
> Harry Hambi BEng(Hons)  MIET  Rsgb
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/