[c-nsp] ASR 1K : EFP / XCONNECT / BDI

[Nicolas KARP]

Hi Adam,

I don't have the xconnect command under the bdi interface :

RTI-MPLS-SAB-01(config)#interface BDI4093
RTI-MPLS-SAB-01(config-if)#xconnect ?
% Unrecognized command

I'm using ASR1001X , ves 03.13.01.S


Any thought ?



# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - -
# - -   Nicolas KARP
# - -   Network and Security Engineer
# - -    Email : liste at karp.fr <nicolas at karp.fr>
# - -    Linkedin :  http://www.linkedin.com/in/nicolaskarp
# - -    Viadeo : http://www.viadeo.com/fr/profile/nicolas.karp
<http://www.viadeo.com/fr/profile/nicolas.karp%20>
# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - -



2014-12-03 10:21 GMT+01:00 Vitkovský Adam <adam.vitkovsky at swan.sk>:

> Hi Nicolas,
>
> This is the config for mixing EFPs and PWs in a common BD + IP interface
> for the BD.
> Manual hub and spoke type of configuration with IP address + VFR at the
> hub location.
>
> interface TenGigabitEthernet0/3
>  mtu 9000
>  service instance 8000 ethernet
>   description CUSTOMER-B
>   encapsulation dot1q 20,30,40
>   rewrite ingress tag pop 1 symmetric
>   bridge-domain 8000
>
> interface BDI8000
>  mtu 9000
>  vrf CUST-B
>  ip add 192.0.2.1 255.255.255.0
>  xconnect vfi CUST-B-BD
>
> l2 vfi CUST-B-BD manual
>  vpn id 1
>  neighbor 10.0.1.3 100 encapsulation mpls
>  neighbor 10.0.1.4 200 encapsulation mpls
>  neighbor 10.0.1.5 300 encapsulation mpls
>
> Spokes would have just EFPs with xconnect.
>
>
> adam
> > -----Original Message-----
> > From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
> > Nicolas KARP
> > Sent: Tuesday, December 02, 2014 6:03 PM
> > To: cisco-nsp at puck.nether.net
> > Subject: [c-nsp] ASR 1K : EFP / XCONNECT / BDI
> >
> > Hi,
> >
> > I need to interconnect 2 platforms on 2 different datacenters.
> >
> > The idea is to create several EFPs on each PE (one at each side) and
> create a
> > default xconnect pw in order to encapsulate the layer2 traffic over our
> MPLS
> > network. I also have some layer 3 interfaces for different vlans which
> need to
> > be used on both datacenters :
> >
> >
> > *PE1 : (same config on PE2, except for the BDI interface)*
> >
> >
> > *interface GigabitEthernet0/0/4*
> > * no ip address*
> > * load-interval 30*
> > * negotiation auto*
> >
> > *## default XCONNECT to DC2*
> > * service instance 1 ethernet*
> > *  encapsulation default*
> > *  xconnect 1.1.1.1 9999 encapsulation mpls pw-class EOMPLS-ETH-TO-VLAN*
> > * !*
> >
> > *## Layer 3 interface via BDI*
> > * service instance 4093 ethernet*
> > *  encapsulation dot1q 4093 exact*
> > *  rewrite ingress tag pop 1 symmetric*
> > *  bridge-domain 4093*
> > * !*
> >
> > *interface BDI4093*
> > * ip vrf forwarding TEST2*
> > * ip address 172.31.0.253 255.255.255.0*
> > * standby 1 ip 172.31.0.254*
> > * standby 1 priority 110*
> > * standby 1 preempt delay minimum 60*
> > *end*
> >
> > *--> I'm missing a xconnect for the vlan 4093...*
> >
> >
> > How can I create a layer3 interface and run a xconnect on the same EFP ?
> > The idea would be to use the same vlans at both locations and terminate
> the
> > Layer3 on a BDI interface in Datacenter1.
> >
> > Do you think it's possible ?
> > I'm not too sure if i'm really clear. Don't hesitate to ask me if you
> have any
> > questions :)
> >
> > Many Thanks for your help !
> >
> > # - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> - -
> > - - - - - - - - - - - - - - - - - - -
> > # - -   Nicolas KARP
> > # - -   Network and Security Engineer
> > # - -    Email : liste at karp.fr <nicolas at karp.fr>
> > # - -    Linkedin :  http://www.linkedin.com/in/nicolaskarp
> > # - -    Viadeo : http://www.viadeo.com/fr/profile/nicolas.karp
> > <http://www.viadeo.com/fr/profile/nicolas.karp%20>
> > # - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> - -
> > - - - - - - - - - - - - - - - - - - -
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>