[c-nsp] BGP Communities

Scott Granados scott at granados-llc.net
Wed Dec 3 10:18:47 EST 2014

A soft reset will do the trick.  The issue is you need to reprocess the routes based on your new route-map but you don’t have to completely clear the session.  Route refresh will take care of this so a clear soft should do the trick.

On Dec 2, 2014, at 9:01 PM, CiscoNSP List <cisconsp_list at hotmail.com> wrote:

> Hi Everyone,
> If you want to set your own community tags to an upstreams routes that you receive(nei route map in), is a hard reset of BGP required for the communities to be set?  (Ive just updated a route-map with my community tags for a given upstream, but there community tags are still assigned to all routes received from them....so Im guessing a hard reset of BGP session to them is required....as "soft" reconf didnt change the community tags?)
> Cheers.  		 	   		  
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

More information about the cisco-nsp mailing list