[c-nsp] Unable to create BFD session on C6500

FF fusionfoto at gmail.com
Wed Dec 10 19:27:19 EST 2014


Just a guess, try making sure mpls ip is either enabled or disabled on both
ports. g0/24 does not have it enabled, so I'm pretty sure your mpls ldp
won't be up either.

On Wed, Dec 10, 2014 at 6:36 AM, Marco Marzetti <marco at lamehost.it> wrote:

> On 09/12/2014 20:39, Murat Kaipov wrote:
>
>> Hello Marco.
>> Keep in mind that ME3600/ME3800 platforms doesn't support BFD offload, and
>> all BFD packets processed by CPU.
>> http://www.cisco.com/c/en/us/td/docs/switches/metro/
>> me3600x_3800x/software/r
>> elease/15-4_1_S/chassis/configuration/guide/3600x_24cxscg/swbfd.pdf
>> Show configuration on both sides please.
>>
>>
>
> Hello Murat,
>
> I'm well aware of the hardware offload limit.
> But cisco brought it to ME-3600X-24CX and I *HOPE* they will do the same
> with the other platforms in future.
>
> Anyway you can find the configuration below
>
> **** C6500_1 ****
> !
> router ospf 1
>  router-id 192.0.2.52
>  auto-cost reference-bandwidth 10000
>  redistribute connected subnets
>  bfd all-interfaces
>  mpls ldp sync
> !
> interface GigabitEthernet2/7
>  mtu 9216
>  ip address 192.0.2.174 255.255.255.252
>  ip ospf authentication message-digest
>  ip ospf message-digest-key 1 md5 7 *HIDDEN*
>  ip ospf network point-to-point
>  ip ospf 1 area 0
>  udld port disable
>  mls qos trust dscp
>  mpls ip
>  bfd interval 300 min_rx 300 multiplier 3
> !
>
>
> **** ME3600X ****
> !
> platform bfd allow-svi
> !
> bfd-template single-hop bfd-core
>  interval min-tx 300 min-rx 300 multiplier 3
> !
> router ospf 1
>  router-id 192.0.2.19
>  auto-cost reference-bandwidth 10000
>  redistribute connected subnets
>  redistribute static subnets
>  bfd all-interfaces
>  mpls ldp sync
>  mpls ldp autoconfig area 0
> !
> interface GigabitEthernet0/24
>  no switchport
>  mtu 9216
>  ip address 192.0.2.173 255.255.255.252
>  ip ospf authentication message-digest
>  ip ospf message-digest-key 1 md5 7 *HIDDEN*
>  ip ospf network point-to-point
>  ip ospf 1 area 0
>  udld port disable
>  bfd template bfd-core
>
> !
>
> Thank you
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
FF


More information about the cisco-nsp mailing list