[c-nsp] Unable to create BFD session on C6500

[Marco Marzetti]

On 11/12/2014 02:50, Мурат Каипов wrote:
> Hello Marco, can you show "Ip ospf interface"  on both sides?
>

Hello,

Of course:

C6500_1#show ip ospf interface brief
Interface    PID   Area            IP Address/Mask    Cost  State Nbrs F/C
Lo0          1     0               192.0.2.52/32      1     LOOP  0/0
Gi2/7        1     0               192.0.2.174/30     10    P2P   1/1
Gi2/6        1     0               192.0.2.110/30     10    P2P   1/1
Gi3/11       1     0               192.0.2.173/30     10    DOWN  0/0
Vl27         1     0               192.0.2.126/28     10    DR    4/4
Gi2/4        1     0               192.0.2.105/30     10    P2P   1/1
Gi1/1        1     0               192.0.2.97/30      10000 P2P   1/1
Gi2/5        1     0               192.0.2.57/30      10    P2P   1/1
C6500_1#show mpls interfaces
Interface              IP            Tunnel   BGP Static Operational
GigabitEthernet1/1     Yes (ldp)     No       No  No     Yes
GigabitEthernet2/4     Yes (ldp)     No       No  No     Yes
GigabitEthernet2/5     Yes (ldp)     No       No  No     Yes
GigabitEthernet2/6     Yes (ldp)     No       No  No     Yes
GigabitEthernet2/7     Yes (ldp)     No       No  No     Yes
GigabitEthernet3/11    Yes           No       No  No     No
Vlan27                 Yes (ldp)     No       No  No     Yes
C6500_1#show ip ospf neighbor

Neighbor ID     Pri   State           Dead Time   Address         Interface
192.0.2.19        0   FULL/  -        00:00:34    192.0.2.173 
GigabitEthernet2/7
192.0.2.18        0   FULL/  -        00:00:38    192.0.2.109 
GigabitEthernet2/6
192.0.2.3         0   FULL/DROTHER    00:00:38    192.0.2.114     Vlan27
192.0.2.4         0   FULL/DROTHER    00:00:36    192.0.2.113     Vlan27
192.0.2.5         0   FULL/DROTHER    00:00:37    192.0.2.119     Vlan27
192.0.2.7         0   FULL/DROTHER    00:00:38    192.0.2.118     Vlan27
192.0.2.50        0   FULL/  -        00:00:39    192.0.2.106 
GigabitEthernet2/4
192.0.2.1         0   FULL/  -        00:00:38    192.0.2.98 
GigabitEthernet1/1
192.0.2.50        0   FULL/  -        00:00:38    192.0.2.58 
GigabitEthernet2/5
C6500_1#



ME3600X#show ip ospf interface brief
Interface    PID   Area            IP Address/Mask    Cost  State Nbrs F/C
Lo0          1     0               192.0.2.19/32      1     LOOP  0/0
Gi0/24       1     0               192.0.2.173/30     10    P2P   1/1
Gi0/23       1     0               192.0.2.201/30     10    P2P   1/1
ME3600X#show mpls interfaces
Interface              IP            Tunnel   BGP Static Operational
GigabitEthernet0/23    Yes (ldp)     No       No  No     Yes
GigabitEthernet0/24    Yes (ldp)     No       No  No     Yes
ME3600X#show ip ospf neighbor

Neighbor ID     Pri   State           Dead Time   Address         Interface
192.0.2.52        0   FULL/  -        00:00:35    192.0.2.174 
GigabitEthernet0/24
192.0.2.50        0   FULL/  -        00:00:35    192.0.2.202 
GigabitEthernet0/23
ME3600X#



As you can see ( on both sides ):
- OSPF is in FULL state
- MPLS is enabled
- LDP is up

Thank You