[c-nsp] Cisco 6503 Sup2T Engine block outbound TCP or UDP Port traffic

[Dobbins, Roland]

On Feb 2, 2014, at 11:28 AM, Joseph Hardeman <jwhardeman at gmail.com> wrote:

> I know how to NULL route IP 's but I don't know if there is a way to block or deny traffic based on destination port's also based on IP ranges.

<http://www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper09186a00800c9470.shtml>

-----------------------------------------------------------------------
Roland Dobbins <rdobbins at arbor.net> // <http://www.arbornetworks.com>

	  Luck is the residue of opportunity and design.

		       -- John Milton