[c-nsp] RAM thing

[Gary Buhrmaster]

On Mon, Feb 17, 2014 at 6:37 PM, Lee <ler762 at gmail.com> wrote:
....
> The impression I got was that the memory doesn't die until the device
> is power cycled.
> Is that incorrect?

For *this particular issue* the reported failure mode occurs
only at power cycle.

Which suggests (but this is just conjecture) that the failing
component is possibly the eeprom (on the memory device)
which stores the spd data.  Without spd data, it is not
possible to detect/configure the memory.