[c-nsp] 3750 Route Map peculiarity.

Pete Lumbis alumbis at gmail.com
Fri Feb 28 10:38:22 EST 2014

Yep, requires routing SDM template.

On Fri, Feb 28, 2014 at 9:10 AM, Phil Mayers <p.mayers at imperial.ac.uk>wrote:

> On 28/02/14 13:41, Michael Robson wrote:
>> However, now when I apply a created route-map to an interface, it take the
>> 'ip policy route-map' command but nothing appears on configuration for the
>> SVI. If I apply a non-existent policy map to the same interface, the
>> configuration shows up on the SVI.
> By "route-map" I assume you actually mean "policy routing"?
> You might (probably do) need a routing SDM template for that.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

More information about the cisco-nsp mailing list