[c-nsp] 6PE FIB usage on 6500/7600

Mark Tinka mark.tinka at seacom.mu
Thu Jan 2 11:06:24 EST 2014


On Thursday, January 02, 2014 04:47:22 PM Phil Mayers wrote:

> I knew there was something else I meant to ask: since I
> know you've had an interest in it, do you have any idea
> how MVPNv6 will pan out absent LDP/RSVP to signal the
> LSPs? Can SR do this job?

At this time (on Junos anyway, which I have more experience 
with re: NG-MVPN), you can transport IPv6 Multicast traffic 
in an NG-MVPN. I should expect Cisco and ALU have an 
implementation as well.

It is based on 6VPE, really, since the "VPN" portion of NG-
MVPN is really just a Unicast l3vpn instantiation.

Of course, it is my hope that native MPLSv6 will also add  
support for p2mpv6 and mp2mpv6 scenarios over SR, which will 
enable true/native NG-MVPNv6 (dual-stack, of course, shared 
within a single NG-MVPN VRF, of course). 

Given that LDPv6 and RSVPv6 have poor vendor interest at the 
moment, you can be reasonably confident mLDPv6 or p2mp RSVP-
TEv6 will never see the light of day either. So yes, SR is 
probably where we want to be pushing for this from vendors 
as well.

Mark.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20140102/51f0fdc6/attachment.sig>


More information about the cisco-nsp mailing list