[c-nsp] DHCPv6

[M K]

Thanks , I was wondering because i was following the configuration in the below documenthttps://supportforums.cisco.com/docs/DOC-27714#Client_Configuration

> From: sjeyamurali at gmail.com
> Date: Sat, 4 Jan 2014 13:03:39 +0000
> Subject: Re: [c-nsp] DHCPv6
> To: gunner_200 at live.com
> CC: cisco-nsp at puck.nether.net
> 
> You have to use :
> 
> Ipv6 address autoconfig
> 
> 
> Jey S.
> Network Engineer
> CCIE #41608
> 
> Sent from my iPhone
> 
> > On 4 Jan 2014, at 12:17, M K <gunner_200 at live.com> wrote:
> >
> > Hi I am trying to configure DHCPv6 , i am using c7200-adventerprisek9-mz.152-4.S2When I configure the server I found all the commands But when I configure the client I cannot find the command ipv6 address dhcp from interface configuration mode ?I enabled ipv6 unicast-routing
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/