[c-nsp] DS3 Interface for a ASR1000

[Mark Tinka]

On Monday, January 06, 2014 09:11:39 AM Alex Nyagah wrote:

> I have a ARS1000 and the carrier can only offer a DS3
> traffic to my network. Can someone please give me the
> part number for a module that I can use, Ethernet (if
> there is) or Serial

You would need a T3/E3 SPA:

	SPA-2XT3/E3 (2-port)
	SPA-4XT3/E3 (4-port)

These SPA's are multi-rate, meaning you can clock them at 
either DS3 (T3) or E3.

You'll also need to order the appropriate cables:

	CAB-T3E3-RF-BNC-F (RF to BNC female, 10 feet)
	CAB-T3E3-RF-BNC-M (RF to BNC male, 10 feet)

Mark.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20140106/99e58a0e/attachment.sig>