[c-nsp] c6500 Low alarms on optics
R S
dim0sal at hotmail.com
Tue Jan 7 07:08:52 EST 2014
I saw some (--) low alarms (current mA) on my optics in intfs ten3/2, 4/2, 4/7, 4/8, 7/1, 7/2, 7/12, 7/13, 7/16.
I'm wondering if these alarms can cause any kind of problems.
Has anyone experience ?
Tks
#sh inter transceiver
Transceiver monitoring is disabled for all interfaces.
If device is externally calibrated, only calibrated values are printed.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.
NA or N/A: not applicable, Tx: transmit, Rx: receive.
mA: milliamperes, dBm: decibels (milliwatts).
Optical Optical
Temperature Voltage Current Tx Power Rx Power
Port (Celsius) (Volts) (mA) (dBm) (dBm)
---------- ----------- ------- -------- -------- --------
Te1/4 33.1 0.00 31.1 -2.2 -0.7
Te1/6 35.9 0.00 37.5 -2.1 -1.3
Te1/7 36.0 0.00 38.7 -2.1 -1.7
Te2/4 30.4 0.00 33.0 -2.1 -1.8
Te2/6 33.7 0.00 37.6 -2.1 -1.8
Te2/7 32.7 0.00 37.8 -2.5 -1.8
Te3/2 33.4 0.00 8.7 -- -2.1 -3.0
Te3/7 35.7 0.00 37.8 -2.4 -2.0
Te3/8 30.8 0.00 30.7 -2.5 -1.1
Te4/2 32.6 0.00 8.0 -- -2.7 -8.2
Te4/7 29.2 0.00 6.8 -- -2.9 -3.2
Te4/8 27.3 0.00 5.6 -- -2.8 -7.2
Te7/1 38.2 0.00 7.2 -- -3.8 -1.8
Te7/2 37.5 0.00 7.1 -- -3.7 -4.7
Te7/5 31.9 0.00 37.3 -2.3 -1.9
Te7/9 28.0 0.00 35.2 -2.0 -1.0
Te7/10 27.7 0.00 38.1 -2.1 -1.1
Te7/12 29.7 0.00 6.0 -- -2.1 -3.2
Te7/13 28.0 0.00 5.9 -- -2.5 -4.6
Te7/16 27.6 0.00 5.7 -- -1.8 -2.1
More information about the cisco-nsp
mailing list