[c-nsp] 7200VXR to ASR migration advice/guidance

[Mark Tinka]

On Friday, January 10, 2014 09:37:03 PM Eric A Louie wrote:
 
> Is there anything I need to watch out for, either
> hardware-wise or software-wise when moving the
> configuration?  (other than the typical
> nomenclature/interface designations and small
> syntactical changes, that is)

The tricky things to consider are those that are tied to the 
hardware, like QoS features, QoS application to interfaces, 
LAG's, Netflow, e.t.c.

> Any recommendations for code version on the ASR?

I'd go with current code.

> 7200VXR is running c7200-pk9u2-mz.124-25c

IOS 12.2SRE or 15 are best for the 7200.

> I'm probably turning the 7200VXR into a ibgp route
> reflector - any opinions about that?

Be sure to run it on an NPE-G2, and on IOS 15.

Mark.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20140110/8e59b5d7/attachment.sig>