[c-nsp] IOS XR mtrace vrf w/LSM?

[Sarala Akella (sakella)]

Hello,

For MVPN mtrace, only unicast queries are supported. There MUST be a unicast routing reachability to the destination address. Multicast queries and hop-by-hop queries are NOT SUPPORTED. Until 4.2.x
The mtrace query MUST be destined to the last hop router from where the traceroute is desired.


Cisco PDI Help Desk
http://www.cisco.com/go/pdihelpdesk


-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Jason Lixfeld
Sent: Friday, January 10, 2014 9:26 AM
To: <cisco-nsp at puck.nether.net>
Subject: [c-nsp] IOS XR mtrace vrf w/LSM?

Am I missing something with mtrace in XR?  No matter what I seem to try, I get nuthin'.

This is label switched multicast, so PIM free core.  Maybe mtrace doesn't work in this type of deployment?

RP/0/RSP0/CPU0:bfr01.905KingStW01.YYZ#mtrace vrf tv 172.16.5.15 172.23.255.2 232.16.2.180 Fri Jan 10 12:13:41.079 EST Type escape sequence to abort.
Querying full reverse path... 

RP/0/RSP0/CPU0:bfr01.905KingStW01.YYZ#mtrace vrf tv 172.16.5.1 172.23.255.2 232.16.2.180               
Fri Jan 10 12:23:33.947 EST
Type escape sequence to abort.
Querying full reverse path... 

RP/0/RSP0/CPU0:bfr01.905KingStW01.YYZ#mtrace vrf tv 172.16.5.15 172.23.255.2 232.16.2.180 172.16.0.32 10 Fri Jan 10 12:23:53.864 EST Type escape sequence to abort.
Querying full reverse path... 

RP/0/RSP0/CPU0:bfr01.905KingStW01.YYZ#




RP/0/RSP0/CPU0:bfr01.905KingStW01.YYZ#sh mrib vrf tv route 232.16.2.180 Fri Jan 10 12:22:21.118 EST

IP Multicast Routing Information Base
Entry flags: L - Domain-Local Source, E - External Source to the Domain,
    C - Directly-Connected Check, S - Signal, IA - Inherit Accept,
    IF - Inherit From, D - Drop, ME - MDT Encap, EID - Encap ID,
    MD - MDT Decap, MT - MDT Threshold Crossed, MH - MDT interface handle
    CD - Conditional Decap, MPLS - MPLS Decap, MF - MPLS Encap, EX - Extranet
    MoFE - MoFRR Enabled, MoFS - MoFRR State, MoFP - MoFRR Primary
    MoFB - MoFRR Backup, RPFID - RPF ID Set Interface flags: F - Forward, A - Accept, IC - Internal Copy,
    NS - Negate Signal, DP - Don't Preserve, SP - Signal Present,
    II - Internal Interest, ID - Internal Disinterest, LI - Local Interest,
    LD - Local Disinterest, DI - Decapsulation Interface
    EI - Encapsulation Interface, MI - MDT Interface, LVIF - MPLS Encap,
    EX - Extranet, A2 - Secondary Accept, MT - MDT Threshold Crossed,
    MA - Data MDT Assigned, LMI - mLDP MDT Interface, TMI - P2MP-TE MDT Interface
    IRMI - IR MDT Interface

(172.16.5.15,232.16.2.180) RPF nbr: 172.16.5.15 Flags: EID
  Up: 14:42:33
  Incoming Interface List
    TenGigE0/0/0/15 Flags: A, Up: 14:42:33
  Outgoing Interface List
    Lmdttv Flags: F LMI TR, Up: 14:42:33 RP/0/RSP0/CPU0:bfr01.905KingStW01.YYZ#sh run int te0/0/0/15 Fri Jan 10 12:22:38.246 EST interface TenGigE0/0/0/15  description Facing IPX3-4 IPTV Head End  vrf tv
 ipv4 address 172.16.5.1 255.255.255.0
!

RP/0/RSP0/CPU0:bfr01.905KingStW01.YYZ#sh run int lo2022 Fri Jan 10 12:22:48.746 EST interface Loopback2022  vrf tv
 ipv4 address 172.16.0.32 255.255.255.255 !

RP/0/RSP0/CPU0:bfr01.905KingStW01.YYZ#




_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/