[c-nsp] Configure 802.1Q on HWIC-4SHDSL-E

[Ruddy RAMOTHE]

No, I want to use EFM.
This is the actual interface configuration:

controller SHDSL 0/1/0
dsl-group pairs  0, 1, 2, 3 efm-bond
!
interface Ethernet0/1/0
no ip address
!
Regards



De : Peter Persson [mailto:peter.persson at bredband2.se]
Envoyé : lundi 7 juillet 2014 09:27
À : Ruddy RAMOTHE
Cc : cisco-nsp at puck.nether.net
Objet : Re: [c-nsp] Configure 802.1Q on HWIC-4SHDSL-E

I might be wrong, but isnt SHDSL based on VFI/VC?

Regards,
Peter

2014-07-07 14:44 GMT+02:00 Ruddy RAMOTHE <ruddy.ramothe at mediaserv.com<mailto:ruddy.ramothe at mediaserv.com>>:
Hi
I would like to know how to configure 802.1Q on the interface HWIC-4SHDSL-E,
Is it mandatory to bridge with an LAN Interface ?
The Card is on a Cisco1841 platform.

Regards.

Ruddy


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/