[c-nsp] Configure 802.1Q on HWIC-4SHDSL-E

[Ruddy RAMOTHE]

I must Have a VLAN ID on the DSL Interface for configuring the bridge with a LAN sub interface
Ruddy

De : Darren O'Connor [mailto:darrenoc at outlook.com]
Envoyé : lundi 7 juillet 2014 09:42
À : Ruddy RAMOTHE; cisco-nsp at puck.nether.net
Objet : RE: [c-nsp] Configure 802.1Q on HWIC-4SHDSL-E

You don't need a vlan tag on the dsl interface in order to bridge to a lan interface that is tagged

Thanks
Darren
http://www.mellowd.co.uk/ccie


> From: ruddy.ramothe at mediaserv.com<mailto:ruddy.ramothe at mediaserv.com>
> To: cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
> Date: Mon, 7 Jul 2014 12:44:30 +0000
> Subject: [c-nsp] Configure 802.1Q on HWIC-4SHDSL-E
>
> Hi
> I would like to know how to configure 802.1Q on the interface HWIC-4SHDSL-E,
> Is it mandatory to bridge with an LAN Interface ?
> The Card is on a Cisco1841 platform.
>
> Regards.
>
> Ruddy
>
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/