[c-nsp] Configure 802.1Q on HWIC-4SHDSL-E

[Tom Hill]

On 07/07/14 16:08, Ruddy RAMOTHE wrote:
> For configuring EFM,  I have to configure an Ethernet Interface, associated to the SHDSL Interface.
> After I created a sub Ethernet Interface with the dot1Q encapsulation. That's Work !
>
> controller SHDSL 0/1/0
> dsl-group pairs  0, 1, 2, 3 efm-bond
> !
> interface Ethernet0/1/0
> no ip address
> !
> interface Ethernet0/1/0.10
> encapsulation dot1Q 10
> ip address 10.0.10.1 255.255.255.0

Surprisingly simple! Slightly off-topic, but in which country are you 
buying wires-only EFM? All EFM from providers here in the UK (that I've 
seen) will demand their own NTE.

Tom