[c-nsp] DSPRM-3-INSUFFICIENT_DSP - On Cisco FXS Voice Card

[Jeremy Bresley]

On 7/25/2014 12:30 AM, Righa Shake wrote:
> Hello,
>
> I am getting the following error on a Cisco 2901 router.
>
>
>
> *Jul 23 12:27:57.167: %DSPRM-3-INSUFFICIENT_DSP:
> voice-port : 0/0/1 Not initialized due to insufficient DSP resources
> *Jul 23 12:27:57.167: %DSPRM-3-INSUFFICIENT_DSP:
> voice-port : 0/0/2 Not initialized due to insufficient DSP resources
>
> System image file is "flash0:c2900-universalk9-mz.SPA.152-4.M6.bin"
>
> The FXS Voice Card is visible.
>
> Cisco CISCO2901/K9 (revision 1.0) with 483328K/40960K bytes of memory.
> Processor board ID FCZ1816C32P
> 2 Gigabit Ethernet interfaces
> 1 terminal line
> 2 Voice FXS interfaces
> DRAM configuration is 64 bits wide with parity enabled.
> 255K bytes of non-volatile configuration memory.
> 255488K bytes of ATA System CompactFlash 0 (Read/Write)
>
What PVDMs do you have installed in the router?

Any TDM interfaces require a PVDM to do the DA/AD conversions 
(FXO/FXS/T1/etc)

Jeremy "TheBrez" Bresley
brez at brezworks.com