[c-nsp] ASR9K interface counters

[Nam NGUYEN]

Great find! Thanks a lot, Brad.

--
Nam
On Jun 6, 2014 9:08 PM, "brad dreisbach" <bradd at ntt.net> wrote:

>
>
> On Jun 6, 2014, at 0:34, Nam NGUYEN <namntj at gmail.com> wrote:
>
> Hi,
>
> Does anyone using ASR 9010 IOS-XR 4.3.0 encounter following issue with
> A9K-40GE-L line cards?
>
> The Rx packets counter of interface Gi0/x/0/5 is always 0. Example output:
>
> RP/0/RSP0/CPU0:ASR9K-1#sh int gi0/1/0/5 | i minute
> Fri Jun  6 15:22:01.202 SGT
>  5 minute input rate 0 bits/sec, 0 packets/sec
>  5 minute output rate 29000 bits/sec, 54 packets/sec
> RP/0/RSP0/CPU0:ASR9K-1#
>
> I have 6x ASR9Ks here, some with a few 40GE-L cards, showing same behavior.
> Traffic is still going through the ports 5 normally.
>
>
> https://tools.cisco.com/bugsearch/bug/CSCud54598
>
> Thanks.
>
> --
> Nam
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>