[c-nsp] ASR1006 Rack Mounts

[Hagen AMEN]

I'm not aware of an alternate rack mount kit for the ASR1006.

I have 2 of them, both mounted in 4-post cabinets. For each, I used a 1RU
"universal rack rail" from racksolutions
<http://www.racksolutions.com/rack-rails.html>, but anything similar would
work fine. Added benefit is that racking the router was much easier, since
the rail could be installed first.

Sincerely,

-- 
Hagen Amen



On Sun, Jun 22, 2014 at 6:34 AM, Skeeve Stevens <
skeeve+cisconsp at eintellegonetworks.com> wrote:

> Hi all,
>
> I am trying to find the code for the ASR1006 Rack Mount Kit that fits
> a four-post flush-mounted installation in a 700mm deep rack. The standard
> rack kit doesn't fit.
>
> Thanks all.
>
>
> ...Skeeve
>
> *Skeeve Stevens - *eintellego Networks Pty Ltd
> skeeve at eintellegonetworks.com ; www.eintellegonetworks.com
>
> Phone: 1300 239 038; Cell +61 (0)414 753 383 ; skype://skeeve
>
> facebook.com/eintellegonetworks ;  <http://twitter.com/networkceoau>
> linkedin.com/in/skeeve
>
> twitter.com/theispguy ; blog: www.theispguy.com
>
>
> The Experts Who The Experts Call
> Juniper - Cisco - Cloud - Consulting - IPv4 Brokering
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
Hagen Amen : Multco Network : 503-988-5227