[c-nsp] ip rsvp bandwidth different values in show run and config
somphong pokfai
somphong.pokfai at gmail.com
Wed Mar 12 08:40:11 EDT 2014
When an incident has been configurat, the variance was totally different.
me360x ver.15.3(3)S2.
3600-testI(config)#int tenGigabitEthernet 0/1
3600-testI(config-if)#*ip rsvp bandwidth 9000000 9000000 *
3600-testI(config-if)#
3600-testI(config-if)#do sh run int te0/1
Building configuration...
Current configuration : 422 bytes
!
interface TenGigabitEthernet0/1
description MPLS 7600 10.5.0.38
no switchport
mtu 9000
bandwidth 10000000
ip address 10.5.49.202 255.255.255.252
ip router isis
ip pim sparse-mode
load-interval 30
carrier-delay msec 10
mpls ip
mpls traffic-eng tunnels
bfd interval 100 min_rx 100 multiplier 3
clns mtu 1497
isis circuit-type level-2-only
isis network point-to-point
* ip rsvp bandwidth 410066 410066*
--
Regards,
Somphong Pokfai
Contracted Outsourcing Engineer
Advanced Information Technology Public Company Limited
Mobile: 08-1834-6138
Office: 02-104-1761
somphong at ait.co.th <sompongp at ait.co.th>
More information about the cisco-nsp
mailing list