[c-nsp] Cisco ASR901 and Tunnels

[Pete Lumbis]

GRE is not supported on the ASR901.


On Mon, May 12, 2014 at 5:59 AM, Ivan <cisco-nsp at itpro.co.nz> wrote:

> I have some Cisco ASR901s and would like to have a layer 2 or layer 3
> tunnel between them over a layer 3 network.
>
> I have configured GRE and tunnel is up and it is possible to ping the
> remote ends.  All looks good from the control plane side but I am not
> having success with traffic being forwarded.
>
> Although I have been able to configure this as far as I can tell there is
> nothing in the doco for this.  I am thinking it maybe one of those "you
> can configure but not supported" things.
>
> Can anyone confirm if GRE tunnels or similar are actually supported?
>
> Hardware: ASR 901
> Software: 15.4(1)S1
> License Level: IPBase
>
> Thanks
>
> Ivan
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>