[c-nsp] static mroute asr9k

Vitkovský Adam adam.vitkovsky at swan.sk
Wed May 28 03:09:04 EDT 2014


Hello,
In XR you should be using the following to configure a static route meant for RPF checking. 

multicast-routing
 address-family ipv4
  static-rpf "prefix" "mask" "NH-int" "NH-ip"



adam

> -----Original Message-----
> From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
> redscorpion69
> Sent: Tuesday, May 27, 2014 5:36 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] static mroute asr9k
> 
> Hello.
> 
> How do I make IOSXR use configuration in "router static address-family ipv4
> multicast" for rpf check instead of default unicast table? I couldn't really find
> documentation on this. I don't want to create additional topologies.
> 
> Regards
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list