[c-nsp] Setting CS0 on ARP traffic

[Gert Doering]

Hi,

On Thu, May 29, 2014 at 04:20:55AM -0700, Tony wrote:
> I'm at a loss at this stage and appealing for any suggestions that people can think of, at this point in time it would appear that I have two options:
> 
> 1. Terminate the services from this carrier on a different device that doesn't suffer from this problem.
> 2. Run the service through a switch (ie. 3750, like it is now) so that the switch can set the packets to CS0.

3. use a carrier that understands technology...

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 291 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20140529/e1b3fba4/attachment.sig>