[c-nsp] vs nexus5596 and port-profiles

[Ryan West]

Add show port-profile to the command table in RANCID.  Put it in the write term section. 

Sent from handheld. 

> On Oct 3, 2014, at 7:24 AM, Arne Larsen / Region Nordjylland <arla at rn.dk> wrote:
> 
> Hi all
> 
> Can somone give me a hint about what we should do.
> We are using port-profiles on our nexus5596 boxes but we don't get the full config when we backup with rancid.
> It's the same problem if we do a tftp copy of then startup-config.
> If I do who port-profile the full config syntax is displayed.
> I can se that the xterm width on defaults to 184 colums.
> have anyone seen this before and if what have you done.
> 
> /Arne
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>