[c-nsp] Optics

Wed Oct 15 11:03:18 EDT 2014

It means that the input power is to strong, should be no more than -2.0
dBm but is currently 1.8dBm

You can place a attenuator on the RX or on the TX on the other end to
bring it below -2

Kveðja,
Sibbi

On 15.10.2014 14:45, "Harry Hambi - Atos" <harry.hambi at bbc.co.uk> wrote:

>Hi all,
>Can someone help to explain the following error message :
>Oct 15 14:39:14.024: %SFF8472-5-THRESHOLD_VIOLATION: Te2/0/1: Rx power
>high warning; Operating value
>:  -1.8 dBm, Threshold value:  -2.0 dBm.
>Does the message suggest a faulty optic?. Thanks in advance.
>
>
>
>Rgds
>Harry
>
>Harry Hambi BEng(Hons)  MIET  Rsgb
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/