[c-nsp] TE tunnels

Johan Borch johan.borch at gmail.com
Fri Oct 17 04:09:33 EDT 2014


Hi!

I have a 6506 that has mpls te tunnels to a bunch of different routers
(everything works), but when i do "show mpls traffic-eng tunnels brief" I
see a lot of tunnels that are not named:

10.19.7.5 9665 [7]               10.19.7.17       Gi3/1      -
up/down
10.19.7.6 36069 [18]             10.19.7.17       Gi3/1      -
up/down
10.19.7.9 30071 [13]             10.19.7.17       Gi3/1      -
up/down
10.19.7.10 35211 [11]            10.19.7.17       Gi3/1      -
up/down
10.19.7.12 54363 [2]             10.19.7.11       Gi3/2      Gi3/1
up/down
10.19.7.12 54364 [4]             10.19.7.1        Gi3/2      Gi3/1
up/down
10.19.7.12 54365 [4]             10.19.7.2        Gi3/2      Gi3/1
up/down
10.19.7.12 54366 [2]             10.19.7.17       Gi3/2      -
up/down
10.19.7.12 54367 [9]             10.19.7.9        Gi3/2      Gi3/1
up/down
10.19.7.12 54368 [7]             10.19.7.10       Gi3/2      Gi3/1
up/down
10.19.7.15 23328 [2]             10.19.7.17       Gi3/2      -
up/down

Any idea what could cause these duplicates?

Cheers,
Johan


More information about the cisco-nsp mailing list