[c-nsp] DHCPv6 accounting on ASR1000

Tassos Chatzithomaoglou achatz at forthnet.gr
Wed Oct 29 06:26:54 EDT 2014


Keep in mind that even in 3.13, IPv6 accounting is still messed up, since there are many open issues related to PPP (IPCP/IPv6CP) accounting.
DHCPv6 is indeed fixed as you said.

--
Tassos
 

Christian Schmit wrote on 29/10/2014 11:57:
> Hi Chris,
>   
>  I have tested 3.13 in the lab yesterday and can confirm that dhcpv6 
> accounting is now working!
>  As version 3.13 is quite new I hesitate to put in on our production ASR 
> boxes.
>   
>  Christian
>   
>   
>
> ----------------------------------------
>  From: "Chris Conn" <cconn at b2b2c.ca>
> Sent: Tuesday, October 28, 2014 6:47 PM
> To: "Chris Conn" <CConn at b2b2c.com>, cschmit at visual-online.lu, 
> cisco-nsp-bounces at puck.nether.net
> Subject: Re: [c-nsp] DHCPv6 accounting on ASR1000   
>
>> Hi,
>>
>> I am trying to setup DHCPv6 accounting to sent start/stop records to a 
> radius server however without success so far. TAC told me that apparently 
> in IOS XE 3.13 this would be working but not in any previous version like 
> IOS XE 3.7.x or 3.10.x according to their tests. We are currently on IOS 
> XE
>> 3.7.5 for our testing. The TAC engineer however cannot find any known bug 
> or information describing this issue.
>> below is the config I tested:
>>
>> aaa accounting delay-start all
>> aaa accounting update periodic 120
>> aaa accounting network default start-stop group radius aaa accounting 
> network RADIUS-GROUP1 start-stop group radius !
>> ipv6 dhcp pool SRV-P1
>> prefix-delegation pool IPV6-P1 lifetime 86400 86400 dns-server 
> x.x.x.x.x.x.x.x dns-server x.x.x.x.x.x.x.x domain-name abcd.com
>> accounting RADIUS-GROUP1
>> !
>> interface Virtual-Template1
>> ip unnumbered Loopback0
>> ip tcp adjust-mss 1452
>> peer default ip address pool IPV4POOL-DYN
>> ipv6 unnumbered Loopback0
>> ipv6 enable
>> ipv6 nd other-config-flag
>> no ipv6 nd ra suppress
>> ipv6 dhcp server SRV-P1
>> ppp mtu adaptive
>> ppp authentication pap chap
>> !
>> ipv6 local pool IPV6-P1 A:B:C::/42 56
>> !
>> radius server VO-Radius
>> address ipv4 a.b.c.d auth-port 1645 acct-port 1646 key 7 
> xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx !
>> Is anyone running dhcpv6 accounting successfully on the ASR1k? If yes 
> under which IOS XE version?
>
> I was also told there was no hope of having this work before 3.13. I
> had a TAC case open from November 2012 to September 2013 for them to
> finally tell me it was a feature request (enhancement...) that would be
> integrated into 3.13. I am not yet running something so new.
>
> TAC Case 623927377
>
> We can chat off-list if you like.
>
> Chris
>
>  
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



More information about the cisco-nsp mailing list