[c-nsp] Upgrade NPE-400 to NPE-G1

[Justin M. Streiner]

On Wed, 3 Sep 2014, Joseph Mays wrote:

> I have a cisco 7206 VXR with NPE-400 running 
> c7200-ik9su2-mz.123-23.bin. I have an NPE-G1 card now that I would like 
> to put in the router instead. Can I just swap the NPE-400 for the G1 
> card and expect it to work? I’m attaching the show ver on the NPE-400 
> system showing the bootloader, IOS, etc.

You might need to move the configurations for some interfaces if you plan 
on using the built-in GE interfaces on the NPE-G1.  Also, IIRC, the NPE-G1 
runs different code than the older NPEs, so you will need to make sure 
that the NPE-G1 code has the same set of features as the NPE-400 code.

jms