[c-nsp] MPLS-TE on ME3600

[Ramji Vasudevan (ramji)]

Waris, James,

MPLS TE over SVI is not supported.

Will look into the documentation and correct appropriately.

Thanks,
Ramji

From: Waris Sagheer (waris)
Sent: Sunday, September 07, 2014 3:55 AM
To: James Bensley; cisco-nsp at puck.nether.net
Cc: Wade Hai Jin (jhai); Ramji Vasudevan (ramji)
Subject: Re: [c-nsp] MPLS-TE on ME3600

James,
MPLS TE/FRR over Etherchannel is supported since Nov 2013, 15.4(1)S.  LDP over MPLS TE on L2VPN is also supported. We need to fix the documentation.

Wade and Ramji,
Can you please clarify the support for MPLS TE over SVI and Interarea TE support? We need to fix the CCO documentation for MPLS TE. It seems to be creating confusion for customers.


Best Regards,

[http://www.cisco.com/web/europe/images/email/signature/horizontal06.jpg]


Waris Sagheer
Technical Marketing Manager
Service Provider Access Group (SPAG)
waris at cisco.com<mailto:waris at cisco.com>
Phone: +1 408 853 6682
Mobile: +1 408 835 1389

CCIE - 19901



This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.

For corporate legal information go to:http://www.cisco.com/web/about/doing_business/legal/cri/index.html



From: James Bensley <jwbensley at gmail.com<mailto:jwbensley at gmail.com>>
Date: Friday, September 5, 2014 at 2:10 AM
To: "cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>" <cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>>
Subject: Re: [c-nsp] MPLS-TE on ME3600

On 11 September 2013 17:15, Eric Van Tol <eric at atlantech.net<mailto:eric at atlantech.net>> wrote:
Hi all,
I'm a bit confused about the documentation for the ME3600 with regard to its MPLS-TE support.  Specifically, the 'MPLS TE' section (http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/release/15.3_3_S/configuration/guide/swmpls.html#wp1183331) states:

The switch does not support these MPLS TE features:
*Interarea TE support for OSPF and IS-IS
*TE path protection
...
"The switch supports MPLS TE fast reroute over only routed ports and not over SVIs or EtherChannels."


Hi All,

To revive this old thread, I'm building out some MPLS-TE tunnels on
15.3.3S code;

Does anyone know if ME3x00's support MPLS-TE FRR over SVIs and
EtherChannels yet; Is this in 15.4 or 15.3.3S3? If so I might be able
to push for an upgrade.

Also I saw this line on that page the ME3600s do have "Support for LDP
over TE tunnels for Layer 3 VPN traffic by entering the mpls ip
interface configuration command on the tunnel interface. The switch
does not support LDP over TE tunnels for Layer 2 VPN traffic" - What
happens with L2VPNs in this case? Do the PEs signal seperate PE-to-PE
LDP LSPs along side the TE LSPs?

Cheers,
James.

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/