[c-nsp] next-hop-self under address-family vpnv4 also?

[Will Tardy]

It¹s not needed.


"address-family vpnv4" section is used to define which routers participate
in the VPNv4.  The underlying MPLS network will forward labels between the
VPNv4 end-point CE's. Next-hop-self isn¹t required. All that¹s required is
MPLS and IGP reachability between the CE¹s participating in the vpnv4
domain.

On 19/09/2014 10:31 am, "CiscoNSP List" <cisconsp_list at hotmail.com> wrote:

>Is it recommended to add it under vpnv4 also?
>
>i.e.
>
>router bgp xxxxxx
>...
>neighbor iBGP-IPv4-PEERS update-source Loopback0
>neighbor iBGP-IPv4-PEERS next-hop-self
>neighbor xxx.xxx.xxx.xxx peer-group  iBGP-IPv4-PEERS...
>address-family vpnv4
>  bgp redistribute-internal
>  neighbor  iBGP-IPv4-PEERS send-community extended
>  neighbor iBGP-IPv4-PEERS next-hop-self
>  neighbor xxx.xxx.xxx.xxx activate
>
>Cheers.
>
>
> 		 	   		  
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/