[c-nsp] Dual SPAN port support on C2960-X

Chris Marget chris at marget.com
Tue Apr 7 14:33:32 EDT 2015


I don't have that exact switch, but...

switch#show inv | inc NAME

NAME: "1", DESCR: "WS-C2960X-48TS-L"

NAME: "2", DESCR: "WS-C2960X-48TS-L"

switch#show version | inc image file

System image file is "flash:c2960x-universalk9-mz.150-2.EX4.bin"

switch#show mon ses all

Session 1

---------

Type                     : Local Session

Source Ports             :

    Both                 : Po4-5

Destination Ports      : Gi1/0/14

    Encapsulation      : Native

          Ingress      : Disabled



Session 2

---------

Type                     : Local Session

Source Ports             :

    Both                 : Po1

Destination Ports      : Gi1/0/48

    Encapsulation      : Native

          Ingress      : Disabled



switch#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

switch(config)#monitor session ?

  <1-68>  SPAN session number


switch(config)#

What's been your experience with Ethernet taps that leads you to specify
"actually works?"

I've generally had good experiences.

/chris


More information about the cisco-nsp mailing list