[c-nsp] 3850?

[Mack McBride]

Honestly on these lower end switches if you really want to look at the traffic,
You may be better off using a server and a SPAN port.

Mack McBride | Network Architect | ViaWest, Inc.
O: 720.891.2502 | mack.mcbride at viawest.com | www.viawest.com | LinkedIn | Twitter | YouTube



-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Marco van den Bovenkamp
Sent: Friday, April 10, 2015 4:43 AM
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] 3850?


> I think there's an uplink module for the 3750-X series which does
> netflow now, too?

Yep. The C3KX-SM-10G. That'll do line-rate FNF (or so thaey claim; haven't used them yet).

Marco.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
This message contains information that may be confidential, privileged or otherwise protected by law from disclosure. It is intended for the exclusive use of the addressee(s). Unless you are the addressee or authorized agent of the addressee, you may not review, copy, distribute or disclose to anyone the message or any information contained within. If you have received this message in error, please contact the sender by electronic reply and immediately delete all copies of the message.