[c-nsp] BGP doesn't advertise prefixes

[Samol]

Hi All,

Weird issue of BGP running on:

Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-M),
Version 12.2(33)SXJ2, RELEASE SOFTWARE (fc4)

cisco WS-C6503-E (R7000) processor (revision 1.3) with 983008K/65536K bytes
of memory.

We did the configuration correctly and we applied on different peers. other
peers are advertising routes, but on peer is not. using "sh ip bgp
route-map X" , we can see that route-map is matching what we want, however,
" show ip bgp neighbors 1.2.3.4 advertised-routes " gives only one prefix
advertise out, and sometimes it doesn't advertise out either.

Is there any known bug on this or anything else should I check ?

Regards.

-- 
Samol Khoeurn
(855) 077 55 64 02 / (855) 070 52 53 46
Network Engineer
Cisco: CCNA/CCNP SP/CCIP/
Juniper: JNCIA/JTNOC/JNCIS-ENT,SP,SEC/JNCIP-ENT,SP
Blog: http://thesaltedegg.net
www.linkedin.com/in/samolkhoeurn