[c-nsp] Enabling ip routing on cat3750 stack

[Artem Viklenko]

2015-08-06 08:55, Peter Rathlev написав:
> On Wed, 2015-08-05 at 22:38 +0300, Artem Viklenko wrote:
>> I expect that entering 'ip routing' shuld be non-disruptive to current
>> L2 traffic on stack as on standalone 3750-s.
>> 
>> Is it right? Is there some possible concerns?
> 
> You should be fine, though OOB management and/or a way to cut the power
> is always a good idea.

I plan to schedule delayed reload first by 'reload in xxx' command.

> 
> When enabling IP routing the CLI will pause for a few seconds.
> 
> Make sure you have the "ip route 0.0.0.0 0.0.0.0 <gateway>" entered to
> replace the "ip default-gateway <gateway>".

Yes, know it.

> 
> I have enabled routing (and disabled it again) many times on 3560/3750
> switches to test things, never saw any problems.


Thanks to all replied!


-- 
Regards!