[c-nsp] How to view BGP community attached to prefix in Cisco ASR routers?

[Martin T]

Hi,

Cisco ASR routers use IOS XR software. One can see the received IPv4
unicast prefixes from BGP neighbor before any inbound policies with
"sh bgp ipv4 unic neigh <neighbor-address> received routes" command.
Example output of this command is:

Status codes: s suppressed, d damped, h history, * valid, > best
              i - internal, r RIB-failure, S stale
Origin codes: i - IGP, e - EGP, ? - incomplete
   Network            Next Hop            Metric LocPrf Weight Path
*  10.10.10.0/24    192.168.4.9                           0 65001 65005 i

Is it possible to see communities attached to 10.10.10.0/24 prefix
before any inbound policies?


thanks,
Martin