[c-nsp] CSR1000V and CPU usage

[Nick Cutting]

There were some discussions on here a few weeks/months back about some best practices for running these devices.

Mostly folks were using these for Route reflectors I think.

-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Roland Dobbins
Sent: 13 August 2015 13:00
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] CSR1000V and CPU usage

On 13 Aug 2015, at 18:30, Robert Hass wrote:

> Everyone know that it's faster but not everybody needs so huge performance.

Until it gets packeted.

-----------------------------------
Roland Dobbins <rdobbins at arbor.net>
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/