[c-nsp] Configuration missing after upgraded IOS router 7600 from 12.2(33)SRD3 to SRE10.

[Paul]

SRE has MFIB implementation, in which that command is deprecated

On 8/13/2015 10:24 PM, Plawansai RMUTT CPE IX wrote:
> Such as:
>
> (config)#mls ip multicast flow-stat-timer 9
> Warning: This command is no longer supported.
>
> snmp-server enable traps ethernet cfm alarm
> ip nat inside source list 114 pool pool_vrf_DR vrf DR
> ip nat inside source static 172.16.76.66 10.10.58.1 vrf MR
>
> https://supportforums.cisco.com/sites/default/files/attachments/discussion/c
> ant_configure.jpg
>
>   
>
> How should I do?
>
>   
>
> Thank you very much.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

-- 
GloboTech Communications
Phone: 1-514-907-0050 x 215
Toll Free: 1-(888)-GTCOMM1
Fax: 1-(514)-907-0750
paul at gtcomm.net
http://www.gtcomm.net