[c-nsp] ASR920 - Service instane

Danielsen.Peter Christian PED PED at kmd.dk
Mon Dec 28 08:12:38 EST 2015


Hello everyone,

I'm trying to configure an ASR920 with service instance, this is not working as planned, in other words is not working.

Scenario:
CPE Router Gi0/0 <-> Gi0/0/10 ASR920 <- - -> ASR920 Gi0/0/13 <->  Te0/0/1/0 ASR9K

My CPE router have a couple of sub-interfaces, that I want to connect to my ASR9K interface using the ASR920 as an aggregation switch/router,

I would like to configure the ASR920 port that connects to the CPE as an trunk port (C-VLANs), and doing an vlan encapsulation (S-VLAN) and transporting this to the port pointing towards my ASR9K without tampering with the S-VLAN or C-VLAN, on the ASR9K doing a "encapsulation dot1q (S-VLAN) second-dot1q (C-VLAN)

I tried to configure based on the Cisoc quide (http://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/ce/b_ce_xe-313s-asr920-book/b_ce_xe-313s-asr920-book_chapter_01.html#ID-1384-000004fa)   - section : 802.1Q Tunneling (QinQ) / Method 2

There are commands that are not allowed, if I follow to configuration examples.

I'm running asr920-universalk9_npe.03.16.01a.S.155-3.S1a-ext on the ASR920 ..

Anyone having any experience with this scenario ?

Thanks in advance .

Peter




Vi g?r opmaerksom p?, at denne e-mail kan indeholde fortrolig information. Hvis du ved en fejltagelse modtager e-mailen, beder vi dig venligst informere afsender om fejlen ved at bruge svarfunktionen. Samtidig beder vi dig slette e-mailen i dit system uden at videresende eller kopiere den. Selvom e-mailen og ethvert vedhaeftet bilag efter vores overbevisning er fri for virus og andre fejl, som kan p?virke computeren eller it-systemet, hvori den modtages og laeses, ?bnes den p? modtagerens eget ansvar. Vi p?tager os ikke noget ansvar for tab og skade, som er opst?et i forbindelse med at modtage og bruge e-mailen.

Please note that this message may contain confidential information. If you have received this message by mistake, please inform the sender of the mistake by sending a reply, then delete the message from your system without making, distributing or retaining any copies of it. Although we believe that the message and any attachments are free from viruses and other errors that might affect the computer or it-system where it is received and read, the recipient opens the message at his or her own risk. We assume no responsibility for any loss or damage arising from the receipt or use of this message.


More information about the cisco-nsp mailing list