[c-nsp] junos olive and ios xrv - mpls ldp neighbor

Aaron aaron1 at gvtc.com
Thu Feb 5 15:55:23 EST 2015


i'm running this in GNS3 jungle.... any reason why i can only get one-way
ldp neigboring to occur ?  junos sees ldp neighbor of ios xrv BUT ios xrv
doesn't see junos ldp neighbor.  ospf is good both ways.  pings work.

 

 

ios
xrv-------------------------------------------------------------------------
-----------------------


RP/0/0/CPU0:R4-xr#sh run int g0/0/0/3
Thu Feb  5 12:53:47.007 UTC
interface GigabitEthernet0/0/0/3
 ipv4 address 10.0.8.2 255.255.255.0
!

 

RP/0/0/CPU0:R4-xr#sh ospf neighbor g0/0/0/3
Thu Feb  5 12:53:49.557 UTC

* Indicates MADJ interface

Neighbors for OSPF 1

Neighbor ID     Pri   State           Dead Time   Address         Interface
10.0.0.6        128   FULL/DR         00:00:37    10.0.8.1
GigabitEthernet0/0/0/3
    Neighbor is up for 00:04:52

Total neighbor count: 1

 

RP/0/0/CPU0:R4-xr#sh mpls ldp neighbor br
Thu Feb  5 12:53:52.426 UTC

Peer               GR  NSR  Up Time     Discovery  Address  IPv4 Label
-----------------  --  ---  ----------  ---------  -------  ----------
10.0.0.3:0         N   N    00:29:47            1        3          14

 

RP/0/0/CPU0:R4-xr#sh mpls ldp discovery
Thu Feb  5 12:54:03.736 UTC

Local LDP Identifier: 10.0.0.4:0
Discovery Sources:
  Interfaces:
    GigabitEthernet0/0/0/2 : xmit/recv
      VRF: 'default' (0x60000000)
      LDP Id: 10.0.0.3:0, Transport address: 10.0.0.3
          Hold time: 15 sec (local:15 sec, peer:15 sec)

    GigabitEthernet0/0/0/3 : xmit/recv
      VRF: 'default' (0x60000000)
      LDP Id: 10.0.0.6:0, Transport address: 10.0.0.6
          Hold time: 15 sec (local:15 sec, peer:15 sec)


junos
olive-----------------------------------------------------------------------
-------------------------

 

 <mailto:root at R6-j> root at R6-j# run show ldp neighbor 10.0.8.2
Address            Interface          Label space ID         Hold time
10.0.8.2           em2.0              10.0.0.4:0               11

[edit]

 <mailto:root at R6-j> root at R6-j# run ping 10.0.8.2 count 1000
PING 10.0.8.2 (10.0.8.2): 56 data bytes
64 bytes from 10.0.8.2: icmp_seq=0 ttl=255 time=0.768 ms
64 bytes from 10.0.8.2: icmp_seq=1 ttl=255 time=0.949 ms
^C
--- 10.0.8.2 ping statistics ---
3 packets transmitted, 2 packets received, 33% packet loss
round-trip min/avg/max/stddev = 0.768/0.859/0.949/0.090 ms

[edit]

 <mailto:root at R6-j> root at R6-j# run show ospf neighbor interface em2.0
Address          Interface              State     ID               Pri  Dead
10.0.8.2         em2.0                  Full      10.0.0.4           1    39

[edit]

 

root at R6-j# run show configuration interfaces em2.0
family inet {
    address 10.0.8.1/24;
}
family mpls;

[edit]

 

 

 

Aaron

 



More information about the cisco-nsp mailing list