[c-nsp] ibgp on 6509 with sup2?

[Mark Tinka]

On 12/Feb/15 12:54, Lukas Tribus wrote:
> Command is there on a rsp720, not sure if its supported though:
>
> PE#show version | inc image
> System image file is "sup-bootdisk:c7600rsp72043-advipservicesk9-mz.153-3.S1.bin"
> PE#conf t
> Enter configuration commands, one per line.  End with CNTL/Z.
> PE(config)#router bgp 65535
> PE(config-router)# address-family ipv4 vrf PIPPO
> PE(config-router-af)#table-map ?
>   WORD  route-map name
>
> PE(config-router-af)#

"table-map" has always been there. What you want is "table-map BLAH filter".

Mark.