[c-nsp] Licensing Question, Stack C3650

Matthew Laughlin laughlinmd at gmail.com
Sat Jan 10 03:23:21 EST 2015

Thank you very much.

Sent from my iPhone

On Jan 10, 2015, at 12:14 AM, Wouter Prins <wp at null0.nl> wrote:

> Hi Matthew,
> this is listed in the Q&A:
> Q. What are the license requirements for a Cisco Catalyst 3650 switch stack?
> A. In a Cisco Catalyst 3650 stack, all switches should be at the same image-based license (IP Services/IP Base/LAN Base) level. The active switch license level is considered as the reference, and the member switch licenses are compared against it. If there is a mismatch, the active switch with the syslog message “license mismatch error” indicates that the stacking was unsuccessful.
> Q. How is a “license mismatch error” fixed in a Cisco Catalyst 3650 stack?
> A. The license level of the mismatched stack member switch can be changed with the license right-to-use activate <license> all acceptEULA CLI command (entire stack should have the same wired license level) and reloaded from the active switch console. This will enable the member switch to join the stack successfully. The customer has to purchase a license before moving to a specific license level.
> http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3650-series-switches/qa_c67-729531.html
> On 10 January 2015 at 05:43, Matthew Laughlin <laughlinmd at gmail.com> wrote:
> Do I need a feature set license per stack or per stack member?
> Regards,
> Matt Laughlin
> Sent from my iPhone
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> -- 
> Wouter Prins
> wp at null0.nl

More information about the cisco-nsp mailing list