[c-nsp] ASR1006 Upgrade

[Jordi Magrané Roig]

Dear Colleagues,

I'm planning upgrade my ASR1006. I never upgrade this model of router before and I have a doubt. I have found the ISSU procedure to upgrade the device but my question is if I can simply put the following command in the configuration:

boot system flash bootflash:NAME-OF-NEW-RELEASE

and reload the device.


The ASR1006 has two ESP-20 and two RP2. In the bootflash and stby-bootflash, I have the old image of the IOS XE and the new image of the IOS XE.

Thanks for your support.

Best regards,
Jordi