[c-nsp] Cisco ME3600 Service Configuration Automation

[Adam Vitkovsky]

Hi Darren,

Do you mean template to create below config based on parameters entered into a form? 
Or you actually need the below to be applied based on some event in the network and also based on the event the parameters need to be altered please? 

adam
> -----Original Message-----
> From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
> Darren Liew
> Sent: 26 January 2015 06:16
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Cisco ME3600 Service Configuration Automation
> 
> Hi Guys,
> 
> Is there anyway to automate the routine L2VPN xconnect configuration on
> Cisco ME3600 IOS?
> 
> I exploring EEM for this purposes, but it doesn't look like a good option.
> Is there any options or is this the best option?
> 
> The configuration I am looking to automate is the below.
> 
> Your experience and suggestion is much appreciated. Thanks !
> 
> Rgds,
> Darren
> 
> interface GigabitEthernet0/1
>  switchport trunk allowed vlan none
>  switchport mode trunk
>  mtu 9000
>  no cdp enable
>  service instance 1 ethernet
>   description IMC-Monitoring
>   encapsulation dot1q 25
>   rewrite ingress tag pop 1 symmetric
>   bridge-domain 25
>  !
>  service instance 2 ethernet
>   encapsulation dot1q <vlan>
>   rewrite ingress tag pop 1 symmetric
>   service-policy input INBOUND-VPLS-5M
>   service-policy output OUTBOUND-VPLS-5M
>   xconnect <remote-ip> <vc-id> encapsulation mpls
>  !
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
---------------------------------------------------------------------------------------
 This email has been scanned for email related threats and delivered safely by Mimecast.
 For more information please visit http://www.mimecast.com
---------------------------------------------------------------------------------------