[c-nsp] IP on xconnect?
Christopher Hunt
dharmachris at gmail.com
Mon Jul 13 12:40:33 EDT 2015
Adam, that's a good idea. I'll try that. For some reason it didn't work
when xconnects were added to subinterfaces. I'll let you know what I find
On Jul 13, 2015 9:21 AM, "Adam Vitkovsky" <Adam.Vitkovsky at gamma.co.uk>
wrote:
> Routed PW springs to mind, though I only see it being supported on ISRG2
> Does the CLI allow you to create SVI like the below:
>
> interface Vlan300
> description management interface
> ip vrf forwarding MNGT
> ip address x.x.x.x y.y.y.y
> xconnect d.d.d.d 102 pw-class pwire-MNGT
>
> Alternatively since you have IP connectivity between the boxes I guess you
> could create a GRE tunnel and manage the box via the tunnel interface.
>
> adam
> > -----Original Message-----
> > From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
> > Christopher Hunt
> > Sent: 10 July 2015 16:04
> > To: c-nsp
> > Subject: [c-nsp] IP on xconnect?
> >
> > I have a pair of 1841s with a ds1 between them. I need to transport two
> > untagged vlans over the T1 (VOICE and DATA). Right now I am doing it
> > with the config below. The problem is that there is no management IP
> > address on the boxes so I cannot diagnose outages without console
> > access. Is there a way I can add an IP to the DATA vlan without adding
> > hardware? Or is there a better way to do this?
> >
> > ip cef
> > l2tp-class l2class
> > !
> > pseudowire-class pwire-DATA
> > encapsulation l2tpv3
> > protocol l2tpv3 l2class
> > ip local interface Loopback0
> > !
> > pseudowire-class pwire-VOICE
> > encapsulation l2tpv3
> > protocol l2tpv3 l2class
> > ip local interface Loopback0
> > !
> > interface Loopback0
> > ip address x.x.199.5 255.255.255.255
> > !
> > interface FastEthernet0/0
> > no ip address
> > xconnect x.x.199.6 100 pw-class pwire-VOICE
> > !
> > interface FastEthernet0/1
> > no ip address
> > xconnect x.x.199.6 101 pw-class pwire-DATA
> > !
> > interface Serial0/0/0
> > ip address x.x.199.1 255.255.255.252
> > no fair-queue
> > service-module t1 clock source internal
> > !
> > ip route 0.0.0.0 0.0.0.0 192.168.100.1
> > ip route x.x.199.6 255.255.255.255 x.x.199.2
> >
> > Cheers,
> > -Chris
> > _______________________________________________
> > cisco-nsp mailing list cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
More information about the cisco-nsp
mailing list