[c-nsp] ME3600 migration to something with more 10 gig ports

[Mark Tinka]

On 15/Jul/15 00:23, Fredrik Vöcks wrote:
> Problem is simular to ME3600 when you have wrong SDM installed.
>
> If you look at current software available to ASR920 it doesn't have
> any SDM templates to chose from and the template that is shipped does
> not have any MDT capabilites.
>
> show platform hardware pp active sdm current | i MDT
>
> So when different templates are released in the future my guess is
> that the exchange rate will be 255 MDT routes for 8000 ipv4 unicast
> routes.

When I tested NG-MVPN on the ASR920 a few weeks ago, I can't recall if
it was in any SDM template mode.

I've pinged the Cisco engineer that we did this with to confirm. Will
report back.

Mark.