[c-nsp] EEM Track Configuration

[Mohammad Khalil]

Hi all
Am sure the below has been asked a lot , but till now am finding people arguing about this

Am trying to track any configuration changes done on my device
If I tracked the %SYS-5-CONFIG_I pattern , that will not do any help because anyone can just access the configuration mode , exit , the message will be generated

If i used parser 

archive
 log config
  logging enable
  notify syslog contenttype plaintext
  hidekeys

I am getting not enough TTY lines , so I have configured 
event manager scheduler applet thread class default number 10


But the screen is getting full of messages like the below

*Jul 27 14:42:30.007: %HA_EM-3-FMPD_ERROR: Error executing applet LOG2 statement 1.0
*Jul 27 14:42:30.295: %PARSER-5-CFGLOG_LOGGEDCMD: User:unknown user  logged command:interface Loopback0
*Jul 27 14:42:30.507: %PARSER-5-CFGLOG_LOGGEDCMD: User:unknown user  logged command:!exec: enable
*Jul 27 14:42:30.611: %HA_EM-3-FMPD_ERROR: Error executing applet LOG2 statement 1.0
*Jul 27 14:42:30.831: %HA_EM-3-FMPD_CLI_CONNECT: Unable to establish CLI session: 'Embedded Event Manager' 


Thanks in advance

BR,
Mohammad